SUPSMAX - PostScript of the MAX, min, or absolute max value on each trace of a SEGY (SU) data set

supsmax <stdin >postscript file [optional parameters]

Optional parameters:
mode=max max value
=min min value
=abs absolute max value

n2=tr.ntr or number of traces in the data set (ntr is an alias for n2)

d1=tr.d1 or tr.dt/10^6 sampling interval in the fast dimension
=.004 for seismic (if not set)
=1.0 for nonseismic (if not set)

d2=tr.d2 sampling interval in the slow dimension
=1.0 (if not set)

f1=tr.f1 or tr.delrt/10^3 or 0.0 first sample in the fast dimension

f2=tr.f2 or tr.tracr or tr.tracl first sample in the slow dimension
=1.0 for seismic (if not set)
=d2 for nonseismic (if not set)

verbose=0 =1 to print some useful information

tmpdir= if non-empty, use the value as a directory path
prefix for storing temporary files; else if the
the CWP_TMPDIR environment variable is set use
its value for the path; else use tmpfile()

Note that for seismic time domain data, the "fast dimension" is
time and the "slow dimension" is usually trace number or range.
Also note that "foreign" data tapes may have something unexpected
in the d2,f2 fields, use segyclean to clear these if you can afford
the processing time or use d2= f2= to over-ride the header values if
not.

See the sumax selfdoc for additional parameter.
See the psgraph selfdoc for the remaining parameters.


Credits:

CWP: John Stockwell, based on Jack Cohen's SU JACKet

Notes:
When the number of traces isn't known, we need to count
the traces for psgraph. You can make this value "known"
either by getparring n2 or by having the ntr field set
in the trace header. A getparred value takes precedence
over the value in the trace header.

When we do have to count the traces, we use the "tmpfile"
routine because on many machines it is implemented
as a memory area instead of a disk file.

In /luton/home/mikew/su/su32.9/src/su/graphics/psplot:
SUPSMAX - PostScript of the MAX, min, or absolute max value on each trace
of a SEGY (SU) data set

supsmax <stdin >postscript file [optional parameters]

Optional parameters:
mode=max max value
=min min value
=abs absolute max value

n2=tr.ntr or number of traces in the data set (ntr is an alias for n2)

d1=tr.d1 or tr.dt/10^6 sampling interval in the fast dimension
=.004 for seismic (if not set)
=1.0 for nonseismic (if not set)

d2=tr.d2 sampling interval in the slow dimension
=1.0 (if not set)

f1=tr.f1 or tr.delrt/10^3 or 0.0 first sample in the fast dimension

f2=tr.f2 or tr.tracr or tr.tracl first sample in the slow dimension
=1.0 for seismic (if not set)
=d2 for nonseismic (if not set)

verbose=0 =1 to print some useful information

tmpdir= if non-empty, use the value as a directory path
prefix for storing temporary files; else if the
the CWP_TMPDIR environment variable is set use
its value for the path; else use tmpfile()

Note that for seismic time domain data, the "fast dimension" is
time and the "slow dimension" is usually trace number or range.
Also note that "foreign" data tapes may have something unexpected
in the d2,f2 fields, use segyclean to clear these if you can afford
the processing time or use d2= f2= to over-ride the header values if
not.

See the sumax selfdoc for additional parameter.
See the psgraph selfdoc for the remaining parameters.


Credits:

CWP: John Stockwell, based on Jack Cohen's SU JACKet

Notes:
When the number of traces isn't known, we need to count
the traces for psgraph. You can make this value "known"
either by getparring n2 or by having the ntr field set
in the trace header. A getparred value takes precedence
over the value in the trace header.

When we do have to count the traces, we use the "tmpfile"
routine because on many machines it is implemented
as a memory area instead of a disk file.